Is It Time to Replace Your Air Compressor?

Do you need air compressor service? If your air compressor isn’t at the top of its game, it might be time to replace it or take it to an air compressor repair shop.

Look for the following signs that your air compressor may be on its last legs:

  • Exterior wear and tear: Broken lights and a rusted exterior are signs that your air compressor has seen a lot of use and may be ready for replacement.
  • Excessive vibrations: Every compressor emits some vibrations; however, if yours makes more noise or vibrates more than usual, this can indicate problems with the unit and may require air compressor service.
  • Worn parts: If your compressor’s seals, rings, bearings or piping are worn or rusted, this can prevent the compressor from producing the appropriate pressure and flow. Consult with an air compressor repair shop to determine if you should replace the parts or get a new compressor.
  • High temperatures: Compressors must be able to cool appropriately for safe functioning. If you notice extreme temperatures in the airflow or unit, the cooling system may have failed.
  • Oil or metal deposits: If you notice any metal deposits in the oil or if the oil is milky in appearance, some of the metal parts may be corroded, or the air ventilation may be restricted. Either way, you should seek professional air compressor service to repair the unit.
  • Insufficient pressure: If the compressor isn’t producing the amount of airflow desired, it may have a leak or need piping repair. Contact your air compressor repair shop to determine if the pressure issue is repairable or if the unit needs to be replaced.

Troubleshooting tips

If you notice any signs that you need air compressor service, use the following troubleshooting checklist to determine the problem and potential next steps:

  • Check power: Examine the power source to see if the outlets are functioning correctly or if there are any other potential issues affecting the power.
  • Check lubricant: Monitor the oil levels, and adjust if needed for optimal performance.
  • Check parts: Make sure all rings, bearings, flywheels, belts and other parts are secure, lubricated and free from corrosion.
  • Check belts: Belts must be properly situated for air compressor operation. Make sure belts are not too tight, too loose or misaligned.
  • Check fuses: Fuses must be the appropriate size, or the machine will frequently blow fuses. Make sure the installed fuses match the electrical load of the unit.
  • Check cooling: Make sure the cooling system is operating correctly to prevent overheating and the production of air that is too hot.

Your compressor professionals

Established in 1932, Wenniger Compressor Co. specializes in air compressors, centrifugal pumps, diaphragm metering pumps, fans, generators, high-pressure air compressors, hoists (all types), lubricated reciprocating air compressors, oil separators, refrigerated air compressor dryers and more.

Contact us today for expert air compressor service. Our employees are all licensed to help you make the best decision about repairs or replacement. Reach us today at 414-372-5320 with any questions or to schedule your next repair.

Read More